"gas monitors"

Beacon 410A controller,standard basic unit for 12 VDC operation

Digester,Gas Analyzer,with internal LEL alarm shutoff,5000ppm H2S

GX-6100 for VOC’s (0 - 4,000 ppm PID, 10.6 eV lamp) with Li-Ion battery pack and 115 VAC charger

SC-8000 toxic gas detector,H2O2,0-3.00 ppm,alkaline type

Model FP-31 (15 & 30 minute averages) Formaldehyde monitor

RI-600 carbon dioxide monitor, 0-2000 ppm, 115 VAC operation and power cord

FI-8000,pump type,alkaline batt,5 mm chamber length,custom,0-100% C3H8 in air,SPE-8404

FlameSpec Blade for Hydrocarbon fires, with enhanced flare rejection capability. With HD camera. Outputs include tri-colour LED, 4-20 mA with HART 7, 3x SPST relays - fire alarm, fault & auxiliary, Modbus RS485. New IR (greyscale) video output via Ethernet TCP/IP, composite NTSC or PAL user selectable

GD-D58,GP type w/HW-6211,0-100 %LEL H2,G1 x 3/4 ports,brass 1/4 inch tube ftgs,115 VAC

GD-K88AI-CL2-10 in NEMA 4X housing,0-10.0 ppm Cl2(chlorine)

Ventis MX4 Personal Gas Monitor, CH4 (0-5%), O2, Li-ion Extended Run Time Battery, Desktop Charger, No Pump, Black, MSHA, Spanish

Tango TX1 Single-Gas Monitor, H2S

35-3001 for IR Methane 100% vol

2-Channel wall mounting housing, RM-5000 Series

Detector/transmitter assembly, Oxy, cond mounting, IS, high humidity (partial pressure)

RX-8000, 0-100% LEL & 0-100% vol HC, & 0-25% O2, (isobutane calibration) with lithium ion battery pack and 115 / 220 VAC charger

EC-600 carbon monoxide monitor, 0-150 ppm, battery operated (2 AA batteries) with 10 meter sensor cable installed, CSA version

FP-300 paper tape maching,0-100 ppb H2S,115 VAC

Diffusion detector assembly, model GD-A80, 0 - 100% LEL hydrogen, explosion proof

Assembly,housing w/preamp,potted w/wires,CT-7 conduit mounting,NH3, 0-200 ppm

Air Alert, Oxygen (O2) 0-25% vol, AC power, 2 relays

Airlink Alert, Hydrogen Sulfide (H2S) 0-500 ppm, dual battery powered, 900 MHz radio

VOC Pro (10.6 eV PID) 0-100 ppm, high range sensor/transmitter with j-box

AirLink VOC Pro, (10.0 eV PID) 0-50.00 ppm, sensor/transmitter with j-box with 900 MHz radio

T2A sensor/transmitter with j-box, Hydrogen Sulfide (H2S), 0-25 ppm

AirLink T3A sensor/transmitter with j-box, Hydrogen Chloride (HCl), 0-100 ppm with 900 MHz radio

Airlink 6900, Hydrogen Sulfide (H2S) 0-100 ppm, dual battery, wireless transmitter, 900 MHz radio

Beacon 410A w/battery charging,w/amber(alm1) & red(alm2) strobes(Ingram)

Digester,Gas Analyzer,with internal LEL alarm shutoff,3000ppm H2S

GX-6100 for VOC’s (0 - 40,000 ppb PID) with Li-Ion battery pack and 115 VAC charger