"gas monitors"

SC-8000 toxic gas detector,ozone,0-1.00 ppm,alkaline type

Triple IR (IR3) Flame Detector for Hydrocarbon Fires. Outputs include Tri-Colour LED, 4-20mA with HART® 7, 3 x SPST relays - Fire Alarm, Fault & Auxiliary, Modbus RS485. SIL 2

Triple IR (IR3) Flame Detector for Energy Transition Fires - e.g. hydrogen, Recommended where compliance is needed with NFPA 33 for spray paint booth applications and or for applications with moving flames. With HD Camera. Outputs include Tri-Colour LED, 4-20mA with HART® 7, 3 x SPST relays - Fire Alarm, Fault & Auxiliary, Modbus RS485. SIL 2

GD-D58,GP type w/HW-6211,0-100 %LEL isobutane,G1 x 3/4 ports,brass 1/4 inch tube ftgs,24 VDC

GD-K88AI in NEMA 4X housingi, Ammonia (NH3), 0-75 ppm, IS type

Ventis MX4, LEL (CH4), CO, H2S, O2, Slim Extended Li-ion Battery, Desktop Charger, Without Pump, Black, UL/CSA, French

T-RKI-723-101-P2 RKI EAGLE®

8-Channel wall mounting housing, RM-5000 Series

Detector/XP stainless steel j-box assembly,ESM-01,NH3 0-75 ppm

Detector hsg/temp comp PCB,potted,w/wires,XP capillary type oxy detector

Beacon 200, two channel controller, 115/220 VAC, with small red strobe light (uses common alarm 1 relay contact for strobe) (no sensors)

Beacon 110 standard basic unit w/horn/strobe and LEL detector on 100 ft cable

EC-600 carbon monoxide monitor, 0-150 ppm, 24 VDC operation with 3 meter sensor cable, CSA version

Diffusion detector assembly, model GD-A80V, 0 - 75 ppm ammonia, MOS sensor, explosion proof

Assembly,35-3001 Sample Draw,CO,with flow fail contacts (open on low flow)

IR detector with XP J-Box,CO2,0 - 9,000 ppm

Air Alert, Hydrogen Sulfide (H2S) 0-50 ppm, AC power, 2 relays

Airlink Alert, Nitric Oxide (NO) 0-250 ppm, dual battery powered, 900 MHz radio

VOC Pro (10.6 eV PID) 0-2000 ppm, high range sensor/transmitter with j-box

T2A sensor/transmitter with j-box, Hydrogen Chloride (HCl), 0-20 ppm

AirLink T3A sensor/transmitter with j-box, Hydrocarbon (CH4) 0-100%LEL, catalytic with 900 MHz radio

Airlink 6900, Ammonia (NH3) 0-100 ppm, dual battery, wireless transmitter, 900 MHz radio

Beacon 410A contoller with large blue strobe and battery charging

Digester gas monitor, 100% volume CH4 / 50% volume CO2

GX-9000,O2/CO/H2S/cat CH4,Li-ion w/AC adapter,for coal/bulk carrier

GX-Force, 4 gas, LEL / O2 / combo H2S & CO with Li-Ion battery, 100-240 VAC charger, belt clip, USB A to USB C data downloading cable, rubber nozzle, 10’ hose with probe

GasWatch 3, CO, Electrochemical sensor, with wrist band

SC-8000 toxic gas detector,hydrogen Iodine,0-5.00 ppm,alkaline type

FI-8000,pump type,lithium ion battery pack,anesthetic,0-8% isofluorane

CO2L Triple IR (IR3) Flame Detector for Hydrocarbon Fires where exhaust gases may be present. Outputs include Tri-Colour LED, 4-20mA with HART® 7, 3 x SPST relays - Fire Alarm, Fault & Auxiliary, Modbus RS485. SIL 2